Home / Products / All Products / PP Centrifugal Fan for Corrosion-Resistant,Plastic Centrifugal Fan

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

PP Centrifugal Fan for Corrosion-Resistant,Plastic Centrifugal Fan

Pp Anti-corrosion Centrifugal Fan, the bending strength of not less than 196Mpa, each section with smooth, smooth surface, no cracks, gaps, burrs and other defects, the overall effect is good, the fan to do static balance test, according to the "balance precision" rigid rotor, grade G6.3 level, from the cylinder wall gap 30mm tip and the error is no more than 10mm, the fan aerodynamic reasonable, large volume, low noise, high efficiency, corrosion resistance.
Availability:
Quantity:
  • XC-05

  • Xicheng

  • 8414593000

1. PP Centrifugal Fan Introduction

Pp Anti-corrosion Centrifugal Fan, the bending strength of not less than 196Mpa, each section with smooth, smooth surface, no cracks, gaps, burrs and other defects, the overall effect is good, the fan to do static balance test, according to the "balance precision" rigid rotor, grade G6.3 level, from the cylinder wall gap 30mm tip and the error is no more than 10mm, the PP Centrifugal Fan aerodynamic reasonable, large volume, low noise, high efficiency, corrosion resistance.


PP centrifugal fan

2. PP Centrifugal Fan Features

1.The chassis production process is as follows: the case can also be made of cold rolling steel plate surface treatment.
2. Impeller manufacturing process is as follows: suitable for office buildings, shopping malls, theaters,hospitals, factories workshop, basements and other places where the ventilation exhaust,the delivery should be the gas does not contain viscous substances, and the gas temperature is not greater than 80 degrees, not more than 150mg/ M3. media content quality.


3. PP Centrifugal Fan Parameters Table

Fiberglass Reinforced Plastics Fan
Specification Pump Wind velocity Wind resistance
XC-FJ-3 1.5KW 2000m³/h 1145Pa
XC-FJ-3.6 2.2KW 4000m³/h 1150Pa
XC-FJ-5.5 4.0KW 6000m³/h 1000Pa
XC-FJ-6 5.5KW 8000m³/h

1100Pa


Our Services  
  1. PERSONALIZED CUSTOMIZATION
    The products can be customized according to customers' requirments and drawings.  products varity.jpg

  2. INSTALLATION
    Our company can send professional engineers to guide device installation and provide a professional plan.
    installation.jpg

  3. AFTER SERVICE
    Our equipment will have a one-year life of quality assurance, repair and replacement are guranteed.


Company Information  

Shenzhen Xicheng Environmental Teachnology Co., LTD. is located in No.34 Zhenxing Road, Baoan District,Shenzhen City,Guangdong,China .It is an environmental protection equipment manufacturer which has been focusing on the environmental protection industry for many years and specializing in the production and sales of environmental protection equipment and various accessories.With the aims of "Quality First, Mutual Benefit, Cooperation and Win-Win", our company is directed by market demand and has independently developed new varieties to satisfy different industries' needs for the differences and diversification of plastic.company strength.jpg

Certifications  

08.jpg

Trade Shows  

FAQ  

1. Are you a factory?
--- Yes, we are a professional exhaust gas treatment manufacturer for more than 15 years.
2.How do you check the goods?
--- We inspect all the materials when they arrive, and have sot inspection during production process. All goods will be tested and double inspected before delivery, providing 100% guarantee for clients.
3. How to select the suitable models?
---The parameters above is just for your reference. We need you to provide us the air flow, solvent composition, working hours,etc .
4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to you within 5 minutes during the working time. All messages will be replied whenever they comes.
5.What's your payment terms?
--- Usually we accept 100%T/T at present. 50% initial payment,down payment before shipment. Other payment terms can be discussed when order confirmed.
6.Where is your factory Located? How can I visit there?
--- We located in Shengtaian industrial park B,Loucun,Baoan district,Shenzhen, Guangdong Province

7.Do you provide OEM service?
--- Yes! We provide OEM & ODM service.
8.What's the lead time for your goods?
--- Normally 25 workdays. For some special parts, the delivery date will be discussed in detail.



Previous: 
Next: 

PRODUCT CATEGORY

Form Name

If you are interested in our products, you can contact us for the best price.

 Copyrights 2021 China Xicheng EP Ltd  All rights reserved. 
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×