Advantages of laboratory PP acid tank

• Plastic material, light weight, the specific gravity is only 0.92

• It has the characteristics of acid and alkali resistance and corrosion resistance, and has the ability to hold laboratory acid and alkali solvents.

• The PP acid cylinder is easy to process. After using the PP sheet to cut the material, after splicing and welding, open the hole to install the liquid inlet and outlet.

• Support customization, material, plate thickness and size specifications can be customized according to the actual needs of customers.

• Xicheng Ep Ltd provides free drawings and designs, and can customize processing acid tanks and laboratory anti-corrosion equipment as required.

Laboratory PP acid tank material

• The acid tank material is PP polypropylene material, which is suitable for processing various laboratory equipment, such as: PP air duct, PP fan, laboratory PP cabinet, etc.

• Non-toxic, odorless, burning does not produce harmful gases

• Heat resistance: Under the specified long-term continuous working pressure, it can operate at about 80 °C.

• Corrosion resistance: strong acid and alkali resistance.

• No scaling: The material is smooth and does not scale for a long time.

• High strength: good toughness and impact resistance.

Laboratory PP acid cylinder sheet thickness

The thickness of the laboratory PP acid tank is: 3mm-15m, which supports the customization of the laboratory PP acid tank. Usually, the larger the acid tank, the thicker the plate thickness is. The general specification is proportional to the material thickness.

The laboratory PP acid cylinders are all welded with pp electrodes, which ensures the safety of users, long-term use without leakage, strong and durable, and the laboratory PP acid cylinders are made of PP material to make up for the lack of high brittleness and danger of glass and ceramic materials. Ceramic acid cylinders are widely used. However, because ceramic acid cylinders are relatively heavy and fragile, they have been eliminated. At present, PP (polypropylene) acid cylinder is the most widely used.

How to use PP acid tank in laboratory

First, place the utensils to be cleaned in the inner tank. After soaking, lift the inner tank upward (the inner tank is just buckled on the outer tank). There are many small holes on the inner tank, and the liquid flows out from the small holes in the inner tank! Take out the soaked items and cover them. Lid! The inner cylinder can be lowered!

Laboratory PP acid tank application

Laboratory PP acid tank is a container for placing sulfuric acid, potassium dichromate, sulfuric acid mixture, nitric acid, hydrochloric acid and other liquids. Put the used laboratory utensils into it for cleaning. The acid tank is mainly used for chemical experiments laboratory, biological laboratory, and other scientific research units.

Precautions for the use of laboratory PP acid tank

• When using the acid tank, you should wear protective gloves in advance

• Do not put acid in the acid tank! The configuration of acid will generate a lot of heat, which will easily cause the acid tank to be deformed by heat and affect the quality

• When lifting and lowering the inner cylinder, it should be done slowly to prevent splashing of acid

• The acid tank should be covered and placed in a safe place that is not easily accessible