Home / Products / All Products / Horizontal Type Flue Gas Desulfurization Air Pollution Control Devices Wet Scrubber


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Horizontal Type Flue Gas Desulfurization Air Pollution Control Devices Wet Scrubber

The horizontal wet scrubber can be used to treat ammonia, acid gas, and toxic gas. It is one of the common waste gas treatment equipment. The ammonia scrubber can absorb the ammonia in the waste gas by humidifying water. The gas purified by waste gas treatment equipment can meet international emission standards.
  • XC-01


  • 8421399090

Wet scrubber

Exhaust gas treatment equipment - waste gas scrubber, spray tower, washing tower

1. Equipment introduction:

    The washing tower is a new type of industrial waste gas treatment equipment, which is widely used in industrial waste gas and dust removal, acid and alkali waste gas, painting industry, printing industry, pharmaceutical industry and other fields, the most commonly used and most practical processing equipment.It can effectively process HCL, HF, NH3, H2SO4, CrO3, HCN, NAOH, H2S, HCHO, etc.Various industrial organic waste gases and inorganic waste gases.

2. Structure and working principle

    The industrial waste gas enters the washing tower and is in full contact with the washing liquid in the tower to generate a neutralization reaction to achieve the treatment purification effect, effectively remove dust and other various gases, and finally meet the discharge requirements.

3.The equipment features:

1. Low noise, stable operation, simple operation, low cost, etc.
2. In addition to high dust efficiency, it can handle various gases by using syrup and water.
3. Using high-quality PP sheet, corrosion-resistant, anti-aging, long service life, and can be customized according to requirements;

4. Technical Parameter Table :

Air volume
Drain outlet
Water tank
Inlet and
outlet size
3000 800 8 DN32 600*700*H700 315 0.75 500
5000 1000 8 DN40 600*800*H700 400 1.5 500
8000 1200 8 DN40 600*1000*H700 500 2.2 500
10000 1500 10 DN40 700*1000*H700 550 2.2 500
12000 1600 10 DN50 700*1000*H700 600 3.75 500
15000 1800 10 DN50 700*1200*H700 650 3.75 500
20000 2000 10 DN50 700*1200*H700 750 5.5 500
25000 2200 10 DN50 700*1200*H700 950 5.5 600
30000 2500 12 DN65 700*1200*H700 1000 5.5 600
35000 2700 12 DN65 1000*700*H700 1100 7.5 600
40000 2900 12 DN65 1000*700*H700 1200 7.5 600
45000 3000 12 DN65 1000*700*H700 1250 7.5 600

1.This form is a common size and we can customize different sizes and requirements according to your needs.
2.The material is polypropylene.
3.Equipment design wind speed 1.8m/s

5.  Equipment pictures:

6. Factory situation:


7. Sweet tip:

1. About product customization: We can customize the processing according to customer requirements.
2. About engineering installation: We can arrange professional engineers to conduct on-the-spot investigations, give professional solutions, and arrange professional engineering teams to go to the site for installation and construction.
3. About after-sales: Our equipment will have a one-year shelf life, we can provide repair and replacement.


1. Are you a factory?
--- Yes, we are a professional exhaust gas treatment manufacturer for more than 15 years.
2.How do you check the goods?
--- We inspect all the materials when they arrive, and have sot inspection during production process. All goods will be tested and double inspected before delivery, providing 100% guarantee for clients.
3. How to select the suitable models?
---The parameters above is just for your reference. We need you to provide us the air flow, solvent composition, working hours,etc for our team to design the suitable unit for you.
4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to you within 5 minutes during the working time. All messages will be replied whenever they comes.
5.What's your payment terms?
--- Usually we accept 100%T/T at present. 50% initial payment,down payment before shipment. Other payment terms can be discussed when order confirmed.
6.Where is your factory Located? How can I visit there?
--- We located in Shengtaian industrial park B,Loucun,Baoan district,Shenzhen, Guangdong Province

7.Do you provide OEM service?
--- Yes! We provide OEM & ODM service.
8.What's the lead time for your goods?
--- Normally 25 workdays. For some special parts, the delivery date will be discussed in detail.



Form Name

If you are interested in our products, you can contact us for the best price.

 Copyrights 2021 China Xicheng EP Ltd  All rights reserved. 
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.