Availability: | |
---|---|
Quantity: | |
XC-07
Xicheng
3922100000
1.Introduction
PP anti-corrosion acid resistant laboratory electroplating tank is most commonly used in electroplating equipment and tank pickling tank. The material is the use of PP material and steel material. The plating bath can be used to do the device for the dissolution of zinc, copper, nickel, gold and so on. The mobile cathode plating bath by the steel tank lining soft PVC tank, conductive device, steam heating pipe and composition the mobile cathode device.
2.Features
Electroplating baths are the most common sink and pickling tank in electroplating equipment. The material is made of PP material and steel structure material. Electroplating tanks can be used to install solutions for galvanizing, copper plating, nickel plating, gold plating and the like. The cathode moving plating tank is composed of tank body, conductive device, steam heating tube and cathode moving device of steel groove lining soft PVC plastic. The choice of the tank structure depends on the nature of the bath and the temperature and other factors. It consists of tank body, solution heating and cooling device, conductive device, motor, reducer, eccentric disk, connecting rod and pole support roller.
The optimum size of the plating bath is of great importance to the growth plan, the estimation of the yield and the quality of the plating.
To determine the size of the plating tank need to meet the three conditions:
To meet the processing requirements of the parts, to fully submerged parts to be electroplated all the surface;
To maintain the plating cycle of electrolyte content of certain stability.
But also take into account the overall coordination of the production line to meet the rationality of electroplating workshop layout requirements.
1.Introduction
PP anti-corrosion acid resistant laboratory electroplating tank is most commonly used in electroplating equipment and tank pickling tank. The material is the use of PP material and steel material. The plating bath can be used to do the device for the dissolution of zinc, copper, nickel, gold and so on. The mobile cathode plating bath by the steel tank lining soft PVC tank, conductive device, steam heating pipe and composition the mobile cathode device.
2.Features
Electroplating baths are the most common sink and pickling tank in electroplating equipment. The material is made of PP material and steel structure material. Electroplating tanks can be used to install solutions for galvanizing, copper plating, nickel plating, gold plating and the like. The cathode moving plating tank is composed of tank body, conductive device, steam heating tube and cathode moving device of steel groove lining soft PVC plastic. The choice of the tank structure depends on the nature of the bath and the temperature and other factors. It consists of tank body, solution heating and cooling device, conductive device, motor, reducer, eccentric disk, connecting rod and pole support roller.
The optimum size of the plating bath is of great importance to the growth plan, the estimation of the yield and the quality of the plating.
To determine the size of the plating tank need to meet the three conditions:
To meet the processing requirements of the parts, to fully submerged parts to be electroplated all the surface;
To maintain the plating cycle of electrolyte content of certain stability.
But also take into account the overall coordination of the production line to meet the rationality of electroplating workshop layout requirements.
| N0.34 Zhenxing Road (Shengtaian Heavy Industrial Park B), Loucun, Guangming New Dist, Shenzhen, Guangdong, China |
| +86 18028775826 |
| Leyte@china-xicheng.com |